HaLow Spec

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== HaLow Bridge Products ======

This page lists HaLow bridge products that connect HaLow modules to standard networks, enabling gateway functionality for AP, STA, and relay nodes.


[[hardware:products:bridges:ah_netbridge_v2.1]]

**Use Cases:**  
  * Bridging HaLow sensor networks to Ethernet  
  * Acting as a gateway in multi-hop relay networks  
  * Protocol translation for IoT integration  
  * Testing and monitoring HaLow networks from a host system  

**Related Pages:**  
  * [[hardware:modules]] – Module contained in the bridge  
  * [[hardware:products]] – Other HaLow products and gateways  
  * [[software:firmware:2.x:at-commands:index]] – AT command reference  

===== Notes =====

* The bridge requires compatible firmware on the contained HaLow module.  
* Recommended for advanced network setups or integration with legacy systems.  
* Refer to AT command documentation for configuring network parameters, relay connections, and bridging behavior.